F-815 Sterilizable pH Electrode

The T-Pull^® style FermProbe^® sterilizable pH electrode is designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstand repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes.

This electrode design specifies that the pH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or
removed from the housing without twisting or disconnecting the electrode cable. Additionally, the T-Pull handle eases installation and removal of the electrode from the housing.

The Model F815 FermProbe has two built-in electrolyte chambers that act to protect and isolate the sensitive inner AgCl reference half-cell. This "double junction", dual-chamber design effectively prevents the most common failure modes of pH electrodes in bio-pharmaceutical applications.

T-Pull^® Handle FermProbe^® pH Electrodes

The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue.

Features

• Rugged handle design eases removal of electrode from housing. No tools required.
• Greatly reduces cable fatigue.
• Electrode retainer nut is part of the handle. Cannot be lost or misplaced.

Specifications

FermProbe pH Electrode Specifications:

• 0 - 14 pH range
• Steam sterilizable to 135° C
• 150 psig max. pressure
• Double junction, Ag-AgCl reference system
• Electrode secures to housing with threaded retainer nut

Choose Electrode Length

If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below.

Confirm Cable Length and Connector

Model F-815 pH electrodes require a disconnect cable and connector assembly. If you need a different cable length or connector, please call the Sales Department for more information.

Ordering Information

Model F-815 pH FermProbe with T-Pull Handle & Disconnect Cap

Recommended Housings

The F-815 pH Electrode has a metric Pg13.5 threaded polymer cap allowing it to be used with European style housings. We recommend the following Broadley-James sensor housings for use with the FermProbe F-815 sterilizable pH electrode:

• Model 320 Unguarded Sensor Housing – Standard 25mm, typical electrode insertion lengths 37mm, 66mm & 113mm
• Model 330 Guarded Sensor Housing – Standard 25mm, typical electrode insertion lengths 52mm, 81mm & 128mm
• The 130mm F-815 FermProbe electrode can also be used with Models 326, 336, 350 & 357

Compatible Cables

The T-Pull style F-815 pH Electrode uses a standard S8 detachable cable connection. We recommend the following cables for use with it:

Cable Type	Sensor Connector & Device Connector	Device Terminal
HP Plug to BNC Plug, Type A
HP Plug to BNC Plug, Type M
HP Plug to DIN Plug, Type M
HP Plug to Crimped Ferrules, Type M
HP Plug to Ferrules, Solution Ground, Type N

Additional information