The T-Pull® style FermProbe® sterilizable pH sensor is designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstand repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other sensors.
This sensor design specifies that the sterilizable pH sensor be secured to the housing by a free-spinning threaded retainer nut. This allows the sensor to be installed or
removed from the housing without twisting or disconnecting the sensor cable. Additionally, the T-Pull handle eases installation and removal of the sensor from the sensor housing.
The Model F815 FermProbe has two built-in electrolyte chambers that act to protect and isolate the sensitive inner AgCl reference half-cell. This “double junction”, dual-chamber design effectively prevents the most common failure modes of pH sensors in biopharmaceutical applications.
T-Pull® Handle FermProbe Sterilizable pH sensors
The T-Pull handle eases installation and removal of the sensor from the housing. The sterilizable pH sensor can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue.
Features
- Rugged handle design eases removal of sensor from housing. No tools required.
- Greatly reduces cable fatigue.
- Sensor retainer nut is part of the handle. Cannot be lost or misplaced.
Specifications
FermProbe pH Sensor Specifications:
- 0 – 14 pH range
- Steam sterilizable to 135° C
- 150 psig max. pressure
- Double junction, Ag-AgCl reference system
- Sensor secures to housing with threaded retainer nut
