Home Bioprocess Accessories Housings Model 350 Housing (2″ Sanitary Tee)
Model 350 Housing 2″ Sanitary Tee
Model350

Model 350 Housing (2" Sanitary Tee)

Commonly used in both the food and pharmaceutical industries, the Model 350 and 357 housings are suitable for sanitary pipe systems with CIP requirements. More often found in downstream processes such as purification.

Ordering Information

Looking for a quote or to discuss your needs?

Our global team are on hand to help

Get a Quote

You can also review the documentation for technical details and purchasing information.

BJC Model 350 Housing Sanitary TeeThe housings are secured into a sanitary pipe tee with a standard flange clamp sealed with a flange gasket. The pH electrode is then inserted into the housing for on-line measurements. When using a standard sanitary tee, the sensor should be positioned such that the tip of the sensor is in the middle of the process flow. Standard and T-Pull® FermProbes® are both compatible with these housings.

Specification

  • 316L stainless steel construction.
  • Serialized for traceability to mill steel specifications.
  • RA32 finish with electropolish on all wetted parts.

Sometimes found on vessels in biotech facilities, this style of port is flush to the vessel wall to minimize crevices. The unique design of the port offers increased drainage around the port and more effective Clean-In-Place (CIP). The NA-connect® port from NovAseptic is compatible with a special sanitary housing, which is secured to the port by a clamp. The port is installed at a 15° angle to allow for proper electrode performance. See the cutaway drawing to the right for typical installation dimensions.

novaseptic-port

NovA-in-port1

d215-nova-installed

Housing Model Class Typical Vessel Insertion Length Used With pH Electrode Models Used With Electrode Length Housing Part Number
Model 350 for 2″ Sanitary Tee Fitting A 100 mm ( 3.94″) F-615 and F-600 130 mm 350-61-H060

Related products

  • Model 356 Guarded Housing Sartorius Safety Port 25mm Pg13.5

    Model 356 Guarded Housing (Sartorius Safety Port 25 mm – Pg13.5)
  • Model 336 Housing Sartorius Port 25mm

    Model 336 Guarded Housing (Sartorius Port 25 mm)
  • Model 346 Housing Sartorius Safety Port 25 mm Pg13.5

    Model 346 Housing (Sartorius Safety Port 25 mm – Pg13.5)
  • Model 320 Housing Standard 25mm

    Model 320 Housing (Standard 25 mm)
  • Model 326 Housing Sartorius Safety Port 25mm

    Model 326 Housing (Sartorius Safety Port 25 mm)
  • Model 330 Guarded Housing Standard 25mm

    Model 330 Guarded Housing (Standard 25 mm)
  • Model 367 1.5″ Sanitary Tee

    Model 367 Housing (1.5″ Sanitary Tee)
  • Model 357 Housing 1.5″ Sanitary Tee

    Model 357 Housing (1.5″ Sanitary Tee)
  • Model 325 Housing Standard 25-mm port Pg13.5

    Model 325 Housing (Standard 25 mm port – Pg13.5)
  • Model 335 Guarded Housing Standard 25mm Pg13.5

    Model 335 Guarded Housing (Standard 25 mm – Pg13.5)