The D1430 Hybrid® OxyProbe® is an amperometric dissolved oxygen (DO) sensor designed for use with SU100 series BPC gas well. The sensor performs continuous measurement behind the rugged, sterile, steel-mesh reinforced membrane barrier of the gas well, eliminating the need to heat sterilize the sensor. The sensor has no wetted materials as the gas well prevents the sensor from direct contact with the BPC media.
The D1430 nanoamp output is compatible with nanoamp input DO transmitters and similar instrumentation. The sensor output can be converted to Modbus RTU with a SmartSync® signal conditioner.
The D1430 threads directly into any SU100 series BPC gas well using the sensor’s Pg13.5 threaded fitting. Hand tightened. No tools needed.
Sensor Specifications
Measurement Range | 0–500 nAmps [0–300% SAT] |
Operational Temp. Range | 5°–50° C [41°–122° F] |
Pressure Range | 0–3750 mmHg [0–72 psig] |
Response Time: | T98 < 15 seconds at 37° C; N2 to AIR T98 < 15 seconds at 37° C; AIR to N2 |
Accuracy | Within 1% full scale (% SAT) |
Sterilization Temperature | Not heat sterilizable. For use only with SU100 series single-use BPC gas wells. |
Insertion Length | 120 mm |
Sensor/BPC Gas Well Interface | Pg13.5 Threads |
Sensor Connector | 8-pin Variopin |
Sensor Output |
|
Power Supply | Not applicable |
Storage Temperature | 5°–35° C [41°–95° F] |
Shelf Life | 60 months |