25 mm Dissolved Oxygen Probe with 1.5” Sanitary Flange

Specifications How to Choose a Sensor Ordering Information

Model D470 and D475 OxyProbe DO Sensors. The sensor fits directly into a 25 mm side port with a 1.5” sanitary flange, eliminating the need for a housing, reducing contamination risks. Designed with an integral 1.5” sanitary flange, this sensor has 2 seals to secure it into the vessel. A gasket seal at the flange holds the sensor securely in place, while the 25 mm o-ring seal minimizes crevices when the sensor is installed. It is important to note, the port should be at least 15 above horizontal in order to be used for any pH or DO sensor. Vessels with these ports are sometimes found in food and pharmaceutical processes that utilize CIP. The interior design and replacement parts of this sensor are the same as other 25 mm OxyProbes. The modular design allows quick replacement of any part, making it easy to maintain and repair the sensor. OxyProbe dissolved oxygen sensors carry a 2-year warranty. REPLACEMENT PARTS O-rings: AG-SR15 Membrane Cartridges: Single, Four and 25 piece Cartridge Kits
	D470	D475
SPECIFICATIONS • 316L Stainless Steel • Serialized for traceability • RA32 finish with electropolish on wetted parts How to choose a sensor: (1) Confirm the vessel has a 1.5” sanitary flange port with 25 mm inner diameter. (2) Decide whether a right angle connector is preferred over a straight connector. (3) Choose the optimum length cable with connector. All DO sensors require a separate cable connector assembly.

Ordering Information

Call 1-800-288-2833 – For Price & Delivery

Sensor Model	Sensor Length	Typical Insertion Length	Sensor Part Number
25 mm OxyProbe® with 1.5? Sanitary Flange
D470	70 mm	35 mm (1.4")	D470-B070-PT-D9
Sensor Model	Sensor Length	Typical Insertion Length	Sensor Part Number
25 mm OxyProbe® with 1.5" Sanitary Flange and Right Angle Connector
D475	70 mm	35 mm (1.4")	D475-B070-PT-D9

Home | Products | FAQs | Documents | Tech Support | Contact | Search