|
||||||||||||||||
| OxyProbe® 19 mm Dissolved Oxygen Sensors for 19 mm Top Ports | ||||||||||||||||
| Specifications How to Choose a Sensor Ordering Information |
||||||||||||||||
| Series D200 and D205 The OxyProbe 19 mm dissolved oxygen sensor features the same rugged and versatile design as the 25 mm OxyProbe. Although the 19 mm OxyProbe sensor has a slightly smaller diameter than the 25 mm sensor, it utilizes the same anode/cathode assembly and membrane cartridges. The 19 mm OxyProbe is often used in both process and benchtop applications. The Model D200 and D205 dissolved oxygen sensors are made of 316L stainless steel to withstand the bioprocess environment. Each probe is serialized for traceability, while the port retainer ring is secured to the sensor to prevent loss. All Broadley-James dissolved oxygen sensors carry a 2-year warranty. SPECIFICATIONS REPLACEMENT PARTS O-rings: AG-S016 |
 |
 |
|
D200
|
D205
|
|
|
|
||
| How to choose a sensor: (1) Determine the port has a 19 mm diameter. (2) Decide whether a right angle connector is preferred over a straight connector. (3) Choose a sensor length appropriate for the application. The sensor tip should be at least 40-50 mm (1 1/2" to 2") below the surface of the media without hitting an obstruction, such as the impeller, within the vessel. (4) Choose the correct cable length and connector. All D.O. sensors require cable and connector assemblies. |
||
Home | Products | FAQs | Documents | Tech Support | Contact | Search
USA and Canada: Broadley-James Corp. (800) 288-2833
Copyright 2007 Broadley-James Corporation. All Rights Reserved. Trademarks
Copyright 2007 Broadley-James Corporation. All Rights Reserved. Trademarks