|
||||||||||||||||
| DO Polarization Modules | ||||||||||||||||
| Ordering Information |
||||||||||||||||
| Polarization Modules All DO sensors may need to be polarized for 6 to 8 hours prior to calibration and use. Polarization modules allow the sensor to be polarized without tying up a transmitter. These units are not autoclavable. Battery Powered Single-Station Polarizer The single-station, battery operated module attaches directly to any OxyProbe®. It uses a lithium battery, with a five year life span, which should be checked annually. This polarization module allows maximum portability of a polarized sensor. |
 |
|
| 110 V Powered Four-Station Polarizer NEW for 2001 - The Broadley -James four-station powered polarizer has been improved by changing the connector inputs from banana plugs to BNC jacks, which are simple and easy to use. The new design allows for more secure connection of the DO sensors to the polarization module. Four cables are included with each box. Each cable has D4 twist-lock coaxial cable plugs to connect to the DO sensor, and BNC plugs to connect to the polarizer. The four-station powered polarizer plugs into any 115 VAC outlet to continuously polarize up to four sensors at 675 mV. This polarization module has an additional terminal to check the battery of a single station polarization module. |
 |
|
|
|
Home | Products | FAQs | Documents | Tech Support | Contact | Search
USA and Canada: Broadley-James Corp. (800) 288-2833
Copyright 2007 Broadley-James Corporation. All Rights Reserved. Trademarks
Copyright 2007 Broadley-James Corporation. All Rights Reserved. Trademarks